Type S


Function

The needle which moves axially in the nozzle is held in the closed position by the force of the spring. The melt pressure, coming out of the extrusion unit pushes back the needle and opens the hole for injection at 180 bar. After the injection process and pressure decrease, the nozzle is closed again, according to the movement of the spring.
 

Technical data:

 
Nozzle type S10 S20 S30
Max. injection flow for PS 500 cm3/sec 1'500 cm3/sec 3'700 cm3/sec
Approximate screw-ø to 30 mm 20-120 mm from 80 mm
Max. injection temperature 400 °C
Max. injection pressure 2500 bar
Operation type Spring